Starter motor for zz4 engine...?
Results 1 to 3 of 3

Thread: Starter motor for zz4 engine...?

  1. #1
    Banned

    Join Date
    Nov 2017
    Posts
    6

    Starter motor for zz4 engine...?

    Hello all,

    my recently purchased 1981 Generation 2 Camaro comes with a modified ZZ4 engine.
    Sadly the starter keeps sticking and doesn't allow me to turn over the engine properly. So the option is to get it rebuilt or buy brand new one.
    Can anyone advise who rebuilds these or if not where to buy a new or reconditioned unit?

    Thanks






    I didn't find the right solution from the internet.
    References:
    http://www.classiccamaroclub.co.uk/p...pic.php?t=4170

    product launch

  2. Remove Advertisements
    CamaroOwners.com
    Advertisements
     

  3. #2
    Senior Member 406Rich's Avatar

    Join Date
    Nov 2016
    Location
    Calif
    Posts
    110
    Joe, you really need to look at the flywheel/flexplate before you rule out the starter, get a pic of it and post the image if needed if the teeth are rounded off and worn badly a new starter will be the same issue...also the starter may need to be shimmed right..they sell shims for this shim on the inside bolt to move the starter out and shim on the outside bolt to move the starter in. You use a paper clip between the teeth starter gear and flywheel teeth for clearance...or use the allen head sized per the video..below. try the adjustment before buying anything, it may be your whole issue..
    Last edited by 406Rich; 11-22-2017 at 09:32 AM.
    `69 RS/SS
    `64 C10 Short Box
    `37 Ford Coupe Chevy powered

  4. #3
    Yup, check those teeth, the alignments and shims. Also check all leads.

  5. Remove Advertisements
    CamaroOwners.com
    Advertisements
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •