69 rustomod - Page 6
Page 6 of 6 FirstFirst ... 456
Results 51 to 54 of 54

Thread: 69 rustomod

  1. #51
    Member

    Join Date
    Nov 2016
    Location
    Anchorage, AK
    Posts
    55

    RS front end install

    829DBD38-5D04-4450-BC9C-E485FFA35522.jpgBBC822DD-2A4E-4CB6-B865-7735CC10AEA7.jpg4AF53A8C-C442-4D95-ABC8-EC2C240036C2.jpg86DEAA85-C96B-47EA-8DD1-2DAB47AFC611.jpg
    Hereís a few shots of the RS package being installed. Still needs some adjustment before itís complete, then blown back apart to prep for paint.

  2. Remove Advertisements
    CamaroOwners.com
    Advertisements
     

  3. #52
    Member

    Join Date
    Nov 2016
    Location
    Anchorage, AK
    Posts
    55

    Pecking away at the little things....

    So over the past couple months I have been working on interior, door latches, window regulators, glass adjustment, and a whole bunch of little stuff. I gotta say, headliners are no joke. Iíve done a fair amount of car work in the past, but the headliner was surprisingly tough for me. Iím not sure if I would do it again or pay someone who knows what they are doing! 7122EB05-F695-4C71-A937-E371FDF21854.jpgCD9B65D1-A791-49F0-9E69-BD8F9A0D88DE.jpg8D656859-960E-4049-821A-13CC380E2BF5.jpgD61FE087-AC67-4BA9-BDF3-32DE6ECB18AE.jpg7122EB05-F695-4C71-A937-E371FDF21854.jpgCD9B65D1-A791-49F0-9E69-BD8F9A0D88DE.jpg8D656859-960E-4049-821A-13CC380E2BF5.jpgD61FE087-AC67-4BA9-BDF3-32DE6ECB18AE.jpg

  4. #53
    Member

    Join Date
    Nov 2016
    Location
    Anchorage, AK
    Posts
    55

    More interior

    Carpet fitment with my little helper locating bolt holes. Using original door panels and seat upholstery complete with minor vinyl repairs for authenticity

  5. #54
    Member

    Join Date
    Nov 2016
    Location
    Anchorage, AK
    Posts
    55

    I canít stand the gaps...

    So no amount of adjusting, pounding, jacking the car up and retightening bolts with the front end sagging will make the gaps acceptable between the fenders and doors. All aftermarket sheet metal, and Iím just not going to be happy with big irregular gaps. So I got the doors to quarters and the doors to rockers at a very consistent 3/16Ē, have had the fenders on and off numerous times, even adjusted the subframe all to no avail. The other thing is the shape. The trailing fender edge is not quite the same shape as the leading door edge. Time to break out the welder. Iím adding rod to the trailing edge of the fender and will take the fenders back off when Iím finally happy and smooth out/refinish the inside edge of the fender edge.

  6. Remove Advertisements
    CamaroOwners.com
    Advertisements
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts